Skip to content

ArmorThane dealer search Find a certified applicator near you

Use the ArmorThane dealer search to find the certified applicator closest to your project. Search a city, zip code or address, share your location, or tap the globe.

Certified applicator network

Where is your project?

Search above, use your location, or tap anywhere on the globe. We’ll show you the closest certified applicator.

  • 357applicator locations
  • 28countries
Request a quote

Send your project to your nearest applicator

Tell us what needs coating. Your request reaches ArmorThane with your matched applicator attached, so we can connect you with the right shop.

No location yet. Find your nearest applicator first, or send the form and we will match you.

Step 1 of 3

We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

How it works

How the ArmorThane dealer search works

  1. 01

    Tell us where the job is

    Search a city, zip code or street address, share your location, or tap anywhere on the globe.

  2. 02

    See your nearest applicator

    The map measures the distance to every certified ArmorThane applicator location and shows you the closest one, plus any others nearby.

  3. 03

    Send your project once

    Describe the job in the form. It reaches ArmorThane with your matched applicator attached, so we can put you in touch with the right shop.

  4. 04

    Get your quote

    The applicator or our team follows up to talk through the surface, the prep and the product, then puts a written quote in front of you.

Certified applicators

What your nearest applicator can coat

ArmorThane applicators spray polyurea and polyurethane coatings that bond to steel, concrete, wood and foam. Ask yours about:

A coating is only as good as the prep under it. Industry groups such as AMPP publish the surface preparation standards most applicators work to, so ask how your surface will be prepared. If you are pricing a truck, our spray-in bedliner cost guide covers what to expect.

Applicator in a protective suit spraying a blue polyurea lining inside a tank
Before you book

Questions to ask your applicator

A good applicator will be glad to answer these. The answers tell you how the job will be done, not just what it costs.

  • How will you prep the surface?

    Prep decides how well a coating holds. Expect grinding, blasting or sanding to open up the surface, then cleaning and drying before anything is sprayed.

  • Which ArmorThane product will you use?

    A truck bed, a roof and a containment pit each need chemistry matched to the wear, chemicals and temperatures they will see. Ask why that product suits your job.

  • How thick will the coating be?

    Thickness is measured in mils. Ask what they plan to apply on your surface and how they check it while they spray.

  • Can I see jobs like mine?

    Photos and references from similar projects are the best preview of the finish you will get, and a good shop is happy to share them.

  • What does your warranty cover?

    Terms vary by applicator and by application. Get them in writing, including anything that would void the cover.

  • Do you work on site?

    Some applicators spray in their own shop. Others run mobile spray rigs and coat on site, which suits roofs, tanks, floors and big equipment.

What affects the price of a coating job

Every quote starts with the area to be coated and the state of the surface. Damaged, rusty or oily surfaces need more prep, and prep is mostly labor. Thicker coats and specialty products use more material. Access matters too: a job that needs scaffolding, heavy masking or a long drive costs more than a vehicle that rolls into a spray booth.

You will get the most accurate quote by sending photos, rough measurements and a note on what the coating has to stand up to, whether that is abrasion, chemicals, standing water or impact. For a ballpark before you ask, see our guides to spray-in bedliner cost and roof coating cost.

FAQ

ArmorThane dealer search questions

Is the ArmorThane dealer search free to use?

Yes. Searching the map and sending a project request cost nothing, and you are under no obligation to hire the applicator you are matched with.

How is the distance measured?

It is a straight line from the place you searched to the town your matched applicator works from. Driving distance will be a little longer. Pins mark a town, not a street address.

Why doesn’t the map show business names?

Your request goes through ArmorThane with the matched applicator attached. That way the right shop gets your project details, and we can step in if they are booked up.

What if the nearest applicator is far away?

Send your project anyway. Many applicators run mobile spray rigs and travel for larger jobs, and our team will tell you who can cover your area.

What should I include in my request?

Describe the surface, its rough size and where it is, plus what the coating has to resist. Photos help a lot. If you have a deadline, mention it so the applicator can plan around it.

Who will contact me after I send the form?

Your matched applicator or the ArmorThane team will reach out by phone or email to talk through the job and set up a quote.

Can I search outside the United States?

Yes. ArmorThane has certified applicators in several countries. Search any city or address worldwide and the map will find the closest location.

Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity