Backyard fountains crack. Koi ponds leak. Concrete pools stain and deteriorate. Polyurea water features coatings from ArmorThane solve all of it — permanently. One seamless spray-applied membrane that cures in seconds, bonds to virtually any surface, and outlasts every alternative on the market.
8 min read
Written by ArmorThane Technical Team
Updated April 2026
Get a Free Quote
Become an Applicator
Six Reasons Polyurea Outperforms Every Other Coating
Landscape architects, pool builders, and property managers across the country have made the switch to polyurea water features coatings for one reason: nothing else delivers this combination of speed, durability, and flexibility.
Absolute Waterproofing
Polyurea creates a single continuous membrane with zero seams, joints, or weak points. Water has nowhere to penetrate, making it the gold standard for ponds, fountains, and decorative pools.
Cures in Seconds
Most polyurea water features coatings reach full hardness within 10 seconds of application. Fixtures can be refilled and operational again the same day — zero downtime on commercial projects.
Extreme Flexibility
With elongation rates exceeding 400%, polyurea stretches and contracts through freeze-thaw cycles without cracking. Seasonal temperature swings that destroy rigid coatings leave polyurea unaffected.
UV & Chemical Resistant
ArmorThane polyaspartic topcoats resist UV degradation and pool chemicals including chlorine, algaecides, and pH balancers. Colors stay vibrant for years without fading or chalking.
Decorative Color Options
Choose from a wide spectrum of custom colors and textures to match any landscape design vision. From natural stone finishes to bold contemporary palettes, polyurea makes it possible.
Eco-Friendly & Safe
Zero VOCs. No solvents. ArmorThane polyurea is safe for fish, plants, and surrounding vegetation once fully cured — making it the responsible choice for living water features.

Waterproof Any Surface in a Single Application
Concrete cracks. Stone erodes. Traditional pond liners shift, bunch, and puncture. Every one of these failures leads to the same expensive problem: water loss. ArmorThane polyurea water features coatings eliminate the root cause by bonding directly to the substrate and forming one unbroken barrier.
Unlike sheet liners that trap moisture between layers and accelerate deterioration underneath, spray-applied polyurea becomes part of the surface itself. It conforms to complex shapes — curved basins, sculpted boulders, tiered fountains — without seams, laps, or mechanical fasteners.
- Bonds to concrete, stone, metal, wood, and fiberglass
- Bridges hairline cracks up to 1/8 inch without prep
- Handles permanent submersion and hydrostatic pressure
- Eliminates need for rubber liners and their failure points

Stop Losing Water — And Money — to Hidden Leaks
Property owners spend thousands chasing leaks through cracked concrete, corroded fittings, and deteriorating liner seams. The repair cycle repeats every few years because traditional fixes treat symptoms, not causes. Polyurea breaks that cycle permanently.
When applied by a trained ArmorThane applicator, polyurea encapsulates the entire water containment structure in a continuous membrane. There are no seams to separate, no edges to lift, and no joints to fail. The coating flexes with the structure through ground settlement and thermal movement.
- Stops active leaks in existing water features
- Prevents new leaks in new construction
- Handles structural movement without delamination
- Applied directly over old coatings after surface prep

Color, Texture, and Finish Options That Transform Landscapes
Polyurea water features coatings are not limited to functional waterproofing. ArmorThane formulations come in a range of custom colors and finish profiles that give landscape designers real creative control. Natural earth tones for rustic ponds. Deep blues for formal reflecting pools. Textured coatings that mimic natural stone.
ArmorThane polyaspartic topcoats add UV stability and gloss retention, so colors look as rich after five years of sun exposure as they did on day one. The topcoat also provides additional chemical resistance for chlorinated features and saltwater installations.
- Custom color matching available
- Textured, smooth, or aggregate finishes
- UV-stable polyaspartic clear and tinted topcoats
- Non-slip textures available for pool decks and splash pads
Water Features Protected by ArmorThane
From backyard koi ponds to commercial resort fountains, polyurea water features coatings adapt to every shape, size, and design requirement.

Garden Ponds
Koi ponds, water gardens, and natural swimming pools sealed with one seamless membrane.

Fountains
Residential and commercial fountains protected from UV, chemicals, and freeze-thaw damage.

Streams & Waterfalls
Artificial streams and cascade features waterproofed to prevent ground saturation and erosion.

Pool Decks
Non-slip decorative coatings for pool surrounds, splash pads, and wet-area walkways.
How Polyurea Stacks Up Against Alternatives
Not all water feature coatings are created equal. Here is a side-by-side look at how polyurea compares to the products most commonly used on ponds, fountains, and pools.
| Property | Polyurea (ArmorThane) | Epoxy | Rubber Liner | Fiberglass |
|---|---|---|---|---|
| Cure Time | 10 seconds | 24–72 hours | N/A (mechanical) | 4–8 hours |
| Seamless Membrane | ✓ | ✓ | ✗ Seams required | ✓ |
| Flexibility / Elongation | 400%+ | 2–5% | 300%+ | 1–2% |
| Freeze-Thaw Resistance | ✓ Excellent | ✗ Cracks | ✓ Good | ✗ Cracks |
| UV Stability | ✓ With topcoat | ✗ Yellows | ✓ Fair | ✗ Degrades |
| Chemical Resistance | ✓ Excellent | ✓ Good | ✗ Limited | ✓ Good |
| Conforms to Complex Shapes | ✓ | ✓ | ✗ Folds/wrinkles | ✗ Rigid molds only |
| Fish & Plant Safe | ✓ Once cured | ✗ Varies | ✓ | ✗ Varies |
| Lifespan | 20+ years | 5–10 years | 10–15 years | 10–15 years |
The Polyurea Water Features Application Process
Professional application by a trained ArmorThane applicator follows a proven five-step process. Most residential water features are completed in a single day.
Surface Inspection
The applicator evaluates the substrate condition, identifies cracks and damage, and determines the right ArmorThane product system for the project. Existing failed coatings or liners are removed if necessary.
1
Surface Preparation
Concrete is ground or blasted to create a proper mechanical profile. Cracks are routed and filled. Metal surfaces are cleaned and primed. Proper surface prep is the single most important factor in coating adhesion and longevity.
2
Primer Application
A penetrating primer is applied to seal the substrate and create a chemical bond for the polyurea basecoat. The primer locks into the pore structure of concrete and masonry for maximum adhesion strength.
3
Polyurea Spray Application
Using plural-component spray equipment, the ArmorThane applicator applies the polyurea basecoat at the specified thickness. The coating cures in seconds, building up a seamless monolithic membrane across the entire water feature.
4
Topcoat & Fill
A UV-stable polyaspartic topcoat is applied for color retention and chemical resistance. After a brief final cure, the water feature is filled and operational — often the same day the work began.
5
Polyurea Water Features — Common Questions
Is polyurea safe for koi ponds and water gardens with live fish?
Once fully cured, ArmorThane polyurea is inert and non-toxic. It will not leach chemicals into the water. Thousands of koi ponds and water gardens across North America are lined with polyurea coatings. We recommend allowing 24 hours of full cure time before introducing fish to freshly coated surfaces, though the coating itself is tack-free in minutes.
How long does a polyurea water feature coating last?
When properly applied by a trained applicator with correct surface preparation, polyurea water features coatings routinely exceed 20 years of continuous service. The coating does not degrade from permanent water submersion, and ArmorThane polyaspartic topcoats prevent UV breakdown on exposed surfaces. Many early installations from the 1990s remain in service today with no signs of failure.
Can polyurea be applied over an existing failed liner or coating?
In many cases, yes. Polyurea bonds well to properly prepared surfaces including aged concrete, fiberglass, and certain existing coating systems. The applicator will evaluate the existing surface and determine whether it provides adequate adhesion. Loose or peeling coatings and rubber liners must be removed first, but sound existing surfaces can often be overcoated directly after grinding and priming.
What does polyurea cost compared to other water feature coatings?
The upfront cost of polyurea is typically higher than basic epoxy or a rubber liner. However, the total cost of ownership over 10 to 20 years is significantly lower because polyurea eliminates the repeated repair and replacement cycles that cheaper alternatives require. When you factor in water loss, landscape damage from leaks, and the labor cost of multiple repairs, polyurea is the most cost-effective long-term solution available.
Does polyurea work in cold climates with freezing temperatures?
Polyurea excels in cold climates. Its extreme flexibility — over 400% elongation — means it stretches and contracts with the substrate through repeated freeze-thaw cycles without cracking, delaminating, or losing adhesion. This is one of the primary reasons landscape professionals in northern states and Canada choose polyurea over rigid coatings like epoxy and fiberglass for water feature protection.
Can I apply polyurea myself, or do I need a professional?
Polyurea requires specialized plural-component spray equipment and trained application technique. It is not a DIY product. ArmorThane maintains a network of factory-trained applicators who can handle projects of any size. If you are interested in becoming an applicator yourself, ArmorThane offers comprehensive training with no franchise fees — and water feature coating is one of the fastest-growing service categories in the network.
What surfaces can polyurea be applied to?
Polyurea bonds to concrete, masonry, natural stone, metal, wood, fiberglass, and most rigid substrates. It conforms to virtually any shape, making it ideal for the irregular surfaces common in water feature construction — sculpted rock formations, curved basin walls, and multi-level cascade structures. Your ArmorThane applicator will recommend the correct primer system for each specific substrate.
Why Become an ArmorThane Applicator?
Water feature coating is one of the fastest-growing segments in the protective coatings industry. Landscape professionals, contractors, and entrepreneurs are building profitable businesses around this single application. Here is why they choose ArmorThane.
01
Zero Franchise Fees
ArmorThane has never charged franchise fees, royalties, or recurring surcharges. You buy the products and equipment you need. Every dollar of profit goes back into your business.
02
On-Site Expert Training
ArmorThane sends trained technicians to your location. No travel required. Your equipment is set up, calibrated, and tested before the trainer leaves. You spray your first job with confidence.
03
Custom-Built Equipment
Mobile Coatings Units built to your specifications. Fixed shop systems designed around your workflow. ArmorThane manufactures its own equipment in-house, so every piece is purpose-built for your projects.
04
Protected Territories
Qualified applicators receive exclusive protected territories at no additional cost. You build your market without competing against other ArmorThane dealers in the same area.
05
Widest Product Range
Polyurea, polyurethane, polyaspartic, spray foam, and specialty formulations. ArmorThane offers more coating varieties than any competitor, so you can serve virtually unlimited market sectors.
06
24/7 Technical Support
Questions at 2 AM before a big job? ArmorThane technical support is available around the clock. You also get access to the Dealers-Only portal with training videos, data sheets, and marketing materials.
Explore Applicator Opportunities
Protect Your Water Features with ArmorThane
Whether you need a polyurea water features coating for a single backyard pond or want to build a business around this growing market, ArmorThane has the products, equipment, and training to make it happen.
Request a Free Quote
Find an Applicator
Become an Applicator
















