Skip to content
Polyurea Coating Near Me

Polyurea Coating Near Me: Find a Certified Applicator

Get matched with a trained ArmorThane applicator near you, see what polyurea costs by project and know what to ask before anyone sprays.

Start a protective coatings business

Spray protective coatings for a living.

ArmorThane sets you up to do this work, and you own the business. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.

ArmorThane Mobile Coatings Unit trailer hitched to a pickup outside the plant Proportioner, A and B material drums and transfer pumps inside the spray rig Applicator in a protective suit holding a plural-component spray gun in a spray booth Proportioner control panel with heater, pressure balance and cycle counter controls

What comes with itProportioners, guns and complete spray rigs. We build them.

$0
franchise fees or royalties
35+
years in business
50+
countries with applicators
24/7
technical support
$525–$700
Pro spray-in bedliner, full-size pickup
ArmorThane bedliner cost guide
$5–$10
Per sq ft, polyurea flake garage floor
ArmorThane polyurea cost guide
$170–$210
Per foot of RV box, sprayed roof
ArmorThane RV roof cost guide
1989
Making polyurea in Springfield, Missouri since
ArmorThane coatings and spray equipment

Search "polyurea coating near me" and you get a mix of bedliner shops, floor installers, roofers and industrial painters, all calling their product polyurea. Some spray a true plural-component system at the thickness the job needs. Some roll on a thin kit and use the same word. This page helps you tell the two apart, price your project and get matched with a certified ArmorThane applicator close to you.

Quick answer

To find polyurea coating near you, start with the job, not the word. Truck beds, garage floors, RV roofs, building roofs, foundations, tanks and equipment each call for a different system and usually a different shop. Ask any local applicator which product they spray, how thick, with what equipment and how they prep the surface. Expect about $525 to $700 for a sprayed full-size bedliner and $5 to $10 per square foot for a polyurea flake garage floor. Roofs, tanks and industrial work are quoted per project.

Find an applicator

Polyurea applicators near you, matched by ZIP

Certified ArmorThane applicators are independent local businesses trained on our systems. Tell us where the project is and what it is, and we route your request to the closest one that does that kind of work. A bedliner shop and a containment contractor are rarely the same company, so the project type matters as much as the ZIP code.

Applicator match

Request a certified polyurea applicator

Enter your ZIP or postal code and a few details. We route the request to the nearest certified ArmorThane applicator; nothing is shared with anyone else.

Enter your ZIP or postal code and pick a project. We will fill in the request form below, so all you add is your contact details.

Rather call? Our Springfield, Missouri office is at (417) 831-5090. In Canada, ArmorThane Coatings, Inc. is at 780-444-6200.

Applications

What polyurea is good for, and who sprays it

Polyurea is a two-part coating that reacts within seconds of the two components meeting at the spray gun. That speed is the whole story. It builds thick, seamless film in one visit, it can go back into service fast, and it bridges small cracks and seams that would show through paint. It also means the equipment and the prep matter more than with almost any other coating, because there is no time to fix a mistake once the material is on.

The same chemistry family covers very different jobs. What changes from one to the next is the product, the thickness and the surface preparation, and with them the kind of contractor you want.

ProjectWhy polyureaWhat to askWhere to start
Truck and trailer bedsSeamless, textured and impact resistant, with no gaps for water to sit under like a drop-inProduct name, thickness in the bed and on the rails, UV topcoatBedliner near me
Garage and shop floorsFlake systems build far thicker than paint or a DIY kit and return to service fastGrinding or etching, moisture test, topcoat chemistryGarage floor coating guide
RV roofsOne seamless membrane with no seams or lap sealant to keep upRecoat or tear-off, deck repairs, thicknessRV roof coatings
Building roofsFlexible membrane over metal, concrete or foam that seals fasteners and seamsMoisture survey, primer, UV-stable topcoatPolyurea roof coating
Foundations and wallsA pure polyurea membrane stretches over hairline cracks instead of splitting with themExcavation, surface prep, product data sheetFoundation waterproofing near me
Tanks, pits and containmentThick-film lining that cures fast enough to build walls in one visitChemical list, blast standard, holiday testingSecondary containment near me
Equipment and machineryAbrasion and impact protection on steel, aluminum and fiberglassBlast profile, edge prep, recoat windowEquipment coatings
The chemistry is shared across these jobs; the product, thickness and prep are not. Tap a column heading to sort.
Sunlight

Aromatic base, aliphatic top

Most sprayed polyurea is aromatic: tough, affordable and stable out of the sun, but it darkens and chalks in direct sunlight. That change is cosmetic, not structural. When color and gloss matter outdoors, a good applicator adds an aliphatic topcoat that holds its color. Our aromatic vs. aliphatic guide shows the difference side by side.

Chemistry

Pure vs. hybrid polyurea

Pure polyurea is polyurea chemistry all the way through. Hybrids blend in polyurethane to change cost and handling. Hybrids are fine for plenty of beds and equipment. For immersion, chemicals and waterproofing, ask for a pure polyurea and the data sheet that backs it up.

Not every job needs polyureaA dry interior floor that only sees foot traffic, a decorative surface that wants a thin film, or a surface that can't be properly prepared may be better served by a different coating. A trustworthy applicator will tell you so instead of selling you the most expensive option.
System picker

Which polyurea system fits your project?

Pick the project and the conditions it lives in. The picker points you to the system family a certified applicator would usually start with, the price basis from our cost guides and the page with more detail. Treat it as the start of the conversation, not a specification.

Project match

Polyurea system picker

Suggestions follow general polyurea practice: aromatic systems for most protection jobs, aliphatic topcoats where sunlight and color matter, pure polyurea for immersion and chemical exposure, and NSF/ANSI 61 products for drinking water. Prices are the ranges published in ArmorThane's 2026 cost guides. The site visit and the product data sheet decide the final system and thickness.

Sun exposure
Drinking water
—
Starting system
—
Topcoat
—
Price basis

Bedliner near me →

Comparing products yourself? The polyurea product line and the polyurea thickness guide explain what the names and mil numbers on a quote mean.

Pricing

What polyurea coating costs near you

Polyurea prices are predictable on small, repeatable jobs and unpredictable on big custom ones. A truck bed or a two-car garage has a known size and a known process, so local prices land in a fairly tight band. A roof, a tank or a mining bucket depends on access, repairs, thickness and how much blasting or grinding the surface needs, so careful contractors quote those after a site visit.

ProjectTypical installed priceWhat moves the numberFull guide
Spray-in bedliner, full-size pickup$525–$700Bed length (8-ft beds often about $50 more), UV topcoat, colorBedliner cost
Polyurea flake garage floor$5–$10 per sq ftGrinding, crack repair, slab moisture, flake coverageGarage floor cost
RV roof, sprayed$170–$210 per foot of boxRecoat or tear-off; rotted decking adds $1,500–$6,000RV roof cost
Building roof coating$1–$4 per sq ft; repair-heavy commercial $4.50–$8+Wet insulation, seams, primer, coating typeRoof coating cost
Foundations, tanks, containment, equipmentQuoted per projectAccess, prep standard, thickness, chemical exposurePolyurea cost
Ranges from ArmorThane's 2026 cost guides, which draw on published price lists and national cost data. Local labor rates and site conditions move every number.
The two biggest leversThickness and prep. Every extra mil is more material, and surface preparation can be 30 to 50 percent of a restoration project. A quote far below the others usually saved money on one of those two, so ask to see both written down before you compare totals.
Vetting

How to vet a polyurea applicator before they spray

Polyurea is unforgiving. The two parts have to meet at the right temperature, pressure and ratio, on a surface that is clean, dry and profiled. Six questions sort the careful shops from the fast ones, and a good applicator will be glad you asked.

Equipment

What do you spray with?

Sprayed polyurea needs a heated plural-component proportioner and heated hose. High-pressure rigs handle fast-set pure polyureas; low-pressure systems suit slower formulas. Either can be right. A roller kit is a different product.

Product

Which product, and can I see the data sheet?

A named product with a published data sheet tells you its hardness, elongation and cure times. The word "polyurea" on an invoice tells you nothing.

Thickness

How many mils, and how will you check?

Get the target thickness in writing for each area and how it will be verified: a wet-film gauge, a dry-film gauge or the math on gallons used.

Prep

How will you prepare the surface?

Steel usually needs abrasive blasting. Concrete needs grinding or shot blasting and a moisture check. Prep is where cheap jobs cut corners and where most coating failures start.

Training

Who trained your crew?

Certified ArmorThane applicators train hands-on with our systems and have a 24/7 tech line behind them. Ask any contractor who trained them and who they call when something looks wrong.

Paperwork

What goes in writing?

Scope, product, thickness, prep, cure time before use and what happens if it fails. If a warranty matters to you, read its terms before you pay.

Red flagsA price with no product name. A per-square-foot quote with no thickness. "We don't need to grind, it'll grab." No moisture test on a concrete slab. Pressure to sign the same day.
Spray day

What happens when the crew shows up

Every project is different, but a well-run polyurea job follows the same rhythm. If a crew skips straight to step five, ask why.

  1. Inspect and confirm the scope

    The applicator looks at the surface, takes moisture readings on concrete and confirms thickness, colors and edges with you before anything is masked.

  2. Protect everything that isn't getting coated

    Overspray travels. Expect plastic, tape and masked edges, and on vehicles, removal of hardware where needed.

  3. Prepare the surface

    Grinding, blasting, sanding or cleaning to the profile the product data sheet calls for, then repairs to cracks, rust or rot. This is usually the longest step of the day.

  4. Prime where the system calls for it

    Concrete and some metals get a primer to seal and bond. Skipping it is one of the most common shortcuts.

  5. Spray in passes to the target thickness

    Because polyurea gels in seconds, the crew builds thickness in overlapping passes and checks it as they go.

  6. Topcoat, inspect and walk through

    Aliphatic topcoats go on where sunlight and color matter. Before the crew leaves, walk the job with them and ask when you can drive on it, walk on it or fill it.

Want to know who does this near you? Use the ZIP request above or browse the applicator search.

Free local quote

A certified applicator. The right system.

Tell us what needs protecting and where. We'll route it to the nearest trained ArmorThane applicator who does that kind of work, and they'll quote it after they've seen it.

Contractors: become an ArmorThane applicator

FAQ

Polyurea coating questions

Is polyurea better than epoxy?

For thick, flexible, fast-curing protection, usually yes. Polyurea stretches with movement, cures in seconds to minutes instead of hours and can be sprayed in conditions that would stall an epoxy. Epoxy is harder, cheaper per gallon and fine for many indoor floors. The right choice depends on the surface, the exposure and the budget.

How long does a polyurea coating last?

It depends on the job, the thickness and the prep. A well-prepared polyurea coating at the right thickness is built for years of service, and most early failures trace back to poor surface preparation or film that went on too thin. Ask your applicator what life to expect on your specific project and get any warranty in writing.

Can I buy polyurea and spray it myself?

Professional spray polyurea needs a heated plural-component proportioner, heated hose and full protective gear, so it is not a homeowner product. Roll-on kits exist, but they are thinner and slower to cure than sprayed systems. If you want to spray professionally, look into becoming a certified applicator.

How much does polyurea cost per square foot?

A polyurea flake garage floor typically runs about $5 to $10 per square foot installed. Roof coatings commonly run $1 to $4 per square foot, more for repair-heavy commercial work. Tanks, foundations and equipment are priced per project because prep and thickness vary so much.

How soon can I use a surface after polyurea is sprayed?

Polyurea sets within seconds and is often dry to the touch within minutes, but full service depends on the product and the job. Your applicator will give you walk-on, drive-on or fill times from the product data sheet. Follow those rather than a general rule.

How do I find a certified ArmorThane applicator near me?

Enter your ZIP or postal code and project in the request tool on this page, or call (417) 831-5090. We route the request to the nearest certified ArmorThane applicator who does that type of work. In Canada, call ArmorThane Coatings, Inc. at 780-444-6200.

AT
Written by the ArmorThane technical team. We have manufactured polyurea, polyurethane and polyaspartic coatings, and the spray equipment that applies them, in Springfield, Missouri since 1989. Certified applicators are independent local businesses. Prices here come from our published cost guides; your applicator's written quote governs.

Sources

  1. ArmorThane, Polyurea coating cost guide (2026). armorthane.com/polyurea-cost/
  2. ArmorThane, Spray-in bedliner cost guide (2026). armorthane.com/spray-in-bedliner-cost/
  3. ArmorThane, RV roof replacement cost guide (2026). armorthane.com/rv-roof-replacement-cost/
  4. ArmorThane, Roof coating cost guide (2026), citing HomeGuide national data. armorthane.com/roof-coating-cost/
Two ArmorThane applicators spraying a large surface in a warehouse
Certified ArmorThane applicators at work. Search for a polyurea coating near me and you want a crew trained on the products they spray.

Finding a Polyurea Coating Near Me

When you search for a polyurea coating near me, you are really looking for three things: a trained crew, the right product for your surface and someone who will stand behind the work. Ask any applicator how long they have been spraying, what training they have had, which products they use and whether they can show you finished jobs like yours. Ask how they prepare the surface, because preparation decides how long any coating lasts. The background on polyurea explains why it is so fast and tough when it is applied correctly. Then use find an applicator to connect with a certified ArmorThane applicator in your area, or read our polyurea guide first.

Polyurea sprayed right, by people trained to do it.

Certified ArmorThane applicators train hands-on with our systems and have a 24/7 tech line behind every job. Tell us where your project is and we'll connect you with the closest one.

United States 417-831-5090 · Canada 780-444-6200
Become an applicator

Start your coatings business with ArmorThane.

Tell us what you want to spray and where you are. An ArmorThane specialist will walk you through the equipment, chemicals, training and startup cost for the work you want to do.

  • Equipment package matched to your applications
  • Hands-on training and applicator certification
  • Technical support once you are spraying
Step 1 of 3

We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

Tell us what needs a polyurea coating.

Describe the project and where it is. We'll route it to the nearest certified ArmorThane applicator who does that kind of work, and they'll quote it after seeing it.

  • What you want coated
  • Rough size or quantity
  • Your city and ZIP or postal code
  • When you'd like it done
Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity