Skip to content
Secondary Containment Near Me

Secondary Containment Near Me: Find Certified Applicators

Professional polyurea spray applicators trained to coat berms, pits, tanks, and containment areas to EPA and SPCC standards. Fast cure. Zero seams. Built to last.

Bulk storage tank farm inside a secondary containment basin lined with polyurea membrane

Start a containment coating business

Line containment for a living.

ArmorThane sets you up to do this work, and you own the business. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.

ArmorThane Mobile Coatings Unit trailer hitched to a pickup outside the plant Proportioner, A and B material drums and transfer pumps inside the spray rig Applicator in a protective suit holding a plural-component spray gun in a spray booth Proportioner control panel with heater, pressure balance and cycle counter controls

What comes with itProportioners, guns and complete spray rigs. We build them.

$0
franchise fees or royalties
35+
years in business
50+
countries with applicators
24/7
technical support

Why Polyurea Is the Gold Standard for Secondary Containment

Not all secondary containment solutions are created equal. Concrete cracks. HDPE liners seam and peel. PVC degrades under UV and chemical exposure. Spray-applied polyurea is the only material that provides a 100% seamless, chemically-bonded barrier that conforms to any shape and cures in seconds — not days.

Extreme Chemical Resistance

Resists aggressive fuels, acids, caustics, solvents, and hydrocarbons that destroy lesser coatings. Formulated specifically for industrial containment environments.

Zero Seams, Zero Weak Points

Spray-applied polyurea creates a monolithic, seamless membrane across the entire containment surface — eliminating the joints and seams where failures begin.

Fast Cure, Minimal Downtime

Polyurea gels in seconds and reaches full cure in under an hour. Your containment system is back in service the same day — critical for operating facilities.

Conforms to Any Shape

Spray-applied membranes coat every corner, crevice, floor-to-wall junction, and complex geometry that prefabricated solutions simply cannot reach.

Temperature Stability

Maintains flexibility and adhesion from -40°F to 300°F. Our polyurea coatings will not crack, peel, or delaminate under thermal cycling in any climate.

EPA/SPCC Compliant

ArmorThane coatings meet the material standards required under EPA SPCC regulations, RCRA, and OSHA 29 CFR 1910.106 for hazardous materials containment.

Secondary Containment Applications We Serve

ArmorThane applicators handle the full spectrum of secondary containment coating projects — from small chemical storage areas to massive above-ground tank farm berms. If you are searching for secondary containment near me because of an inspection or a new tank, start with the EPA's guidance on secondary containment under the SPCC rule, then talk to a certified applicator about the right lining.

Above-Ground Storage Tank Berms

EPA SPCC-compliant liner systems for AST farms holding crude oil, refined fuels, chemical feedstocks, and more. Size-for-size capacity compliance assured.

Chemical & Hazardous Material Storage Pads

Containment pads and floor linings for warehouses, distribution centers, and manufacturing facilities storing corrosive or flammable chemicals.

Trench & Pit Liners

Spray-applied polyurea lines drip trenches, sump pits, and below-grade containment structures where prefab products fail to seal corners and penetrations.

Fuel Containment & Spill Berms

Military-grade fuel containment berms, generator containment pads, and refueling station secondary containment systems that hold 110% of tank volume.

Wastewater & Effluent Containment

Secondary containment coatings for wastewater holding basins, process water lagoons, and leachate collection systems at industrial and municipal facilities.

Existing Liner Repair & Re-Lining

Failed concrete, cracked HDPE, or delaminated epoxy coatings? Our applicators can spray directly over existing substrates to restore full containment integrity.

Industries That Rely on ArmorThane Applicators

Cover of the ArmorThane brochure: Polyurea Coatings for Secondary Containment
Brochure

Polyurea Coatings for Secondary Containment

Flip through the whole brochure right here, or open it full screen on Issuu to share it.

Spcc rule (oil & fuel)

The Spill Prevention, Control, and Countermeasure (SPCC) rule applies to non-transportation-related onshore facilities that could discharge oil into U.S. waterways. Covered facilities must provide containment sized for the largest single container plus precipitation freeboard.

Freeboard for Precipitation

Outdoor containment must add capacity for rainfall. The common engineering convention is to size for the largest container plus a 25-year, 24-hour storm event on the exposed containment footprint. Indoor containment: container volume only.

Bulk Storage Requirements

Under 40 CFR 112.8(c)(2), bulk storage container installations must have secondary containment to hold the entire capacity of the largest single container plus sufficient freeboard to contain precipitation.

ArmorThane Applicators

How the ArmorThane Applicator Process Works

From first contact to a fully-coated, compliance-ready secondary containment system — here is exactly what to expect when you work with an ArmorThane-certified applicator:

Site Evaluation

01

Your local applicator inspects the containment area, assesses the substrate condition, measures dimensions, and identifies any issues that must be addressed before coating.

Substrate Preparation

02

Proper surface prep — pressure washing, shot blasting, crack repair, and priming — is critical to achieving the adhesion bond that keeps your liner sealed for decades.

Coating Application

03

Using a heated, high-pressure plural-component spray rig, the applicator applies ArmorThane polyurea in a controlled, uniform coat at the specified thickness.

Inspection & Testing

04

Holiday detection testing checks for pinholes, voids, or thin spots. Dry film thickness is measured at multiple points to confirm compliance-grade coverage.

Secondary Containment Near Me

Documentation

05

Your applicator provides application records including product data sheets, project specs, and inspection reports — the documentation you need for regulatory compliance files.

Regulatory Compliance & Standards

Secondary containment is not optional — it is the law. A properly applied ArmorThane coating system helps your facility meet the most demanding federal and state environmental regulations.

Key Regulations We Help You Meet

  • EPA 40 CFR Part 112 — SPCC (Spill Prevention, Control & Countermeasure)
  • Cracks, blisters, or coating damage
  • OSHA 29 CFR 1910.106 — Flammable & Combustible Liquids
  • NFPA 30 — Flammable & Combustible Liquids Code
  • DOT/PHMSA Pipeline Secondary Containment Requirements
  • State-Level Environmental Agency Regulations

Periodic Integrity Testing

Secondary containment
  • Products formulated and tested to meet EPA containment material standards
  • Application performed by trained, certified ArmorThane applicators
  • Documented DFT (dry film thickness) testing on every project
  • Chemical resistance data available for specific regulated substances
  • Full project documentation package provided upon completion
  • Support for SPCC plan engineers and environmental consultants

Secondary Containment Near Me: Find an Applicator Today

With ArmorThane-certified applicators in nearly every state and on multiple continents, a qualified professional is closer than you think. Connect with your nearest certified contractor for a free project assessment.

Find an applicator

Containment applicators near you, matched by ZIP

Tell us what the containment holds and where the site is. We route the request to the nearest commercial-certified ArmorThane applicator, who reviews the chemicals and the structure before quoting a lining.

Applicator match

Request a containment applicator

Enter your ZIP or postal code and a few details. We route the request to the nearest certified ArmorThane applicator; nothing is shared with anyone else.

Frequently asked questions

What is a secondary containment applicator?

A secondary containment applicator is a trained and certified professional contractor who specializes in spray-applying polyurea or polyurethane coatings to create seamless, chemically resistant liners for secondary containment systems such as berms, pits, trenches, tanks, and containment pads. ArmorThane-certified applicators have completed factory training and are qualified to apply industrial-grade coating systems that meet EPA, SPCC, and RCRA regulatory requirements.

How do I find a secondary containment contractor near me?

The easiest way is to use our ArmorThane Applicator Search tool. Simply enter your location and we will connect you with the nearest certified ArmorThane applicator in your area. Our network spans all 50 U.S. states and numerous international markets. You can also call us directly at 417-831-5090 Monday–Friday and we will personally match you with the right applicator for your project.

Why does secondary containment need a professional applicator — can I DIY it?

Polyurea and industrial polyurethane coatings require heated, high-pressure plural-component spray equipment — gear that is not available at hardware stores and requires significant training to operate correctly. Improper application results in adhesion failures, pinholes, and under-thickness that will fail inspection and leave your facility exposed to environmental liability. For EPA-regulated containment, professional application with proper documentation is essential and often legally required.

What types of secondary containment can polyurea coat?

ArmorThane-certified applicators can coat virtually any secondary containment structure, including above-ground storage tank (AST) berms, chemical storage pads, drip trenches, sump pits, below-grade containment vaults, spill containment berms, fueling station containment, wastewater basins, and more. Polyurea is ideal because it is spray-applied and conforms to any shape — including complex geometry, floor-to-wall junctions, and penetrations where rigid prefab products fail.

How much does secondary containment coating cost?

Project costs vary based on the size of the containment area, substrate condition, required coating thickness, number of coats, and your geographic location. Because polyurea cures quickly and dramatically reduces ongoing maintenance and potential EPA fine liability, it offers exceptional long-term value. Contact an ArmorThane applicator near you for a site-specific quote.

How long does a polyurea secondary containment lining last?

When properly applied to a correctly prepared substrate, ArmorThane polyurea secondary containment linings are designed to last 20+ years in industrial service. The material resists UV degradation, thermal cycling, and chemical exposure that quickly degrade epoxies, HDPE liners, and concrete coatings. Periodic inspections and minor touch-ups can extend the service life even further.

Ready to Protect Your Containment Area?

Connect with a certified ArmorThane secondary containment applicator in your area, or contact us directly to discuss your project needs. Our team is available Monday–Friday, 8am–5pm CST.

Also explore: Secondary Containment Coatings | Why Polyurea for Secondary Containment | Oil Containment Solutions

Become an applicator

Start your coatings business with ArmorThane.

Tell us what you want to spray and where you are. An ArmorThane specialist will walk you through the equipment, chemicals, training and startup cost for the work you want to do.

  • Equipment package matched to your applications
  • Hands-on training and applicator certification
  • Technical support once you are spraying
Step 1 of 3

To help us prepare for a discussion with you, please provide some information on the type of Protective Coating business you are considering, including where your business would be located.

Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity