Skip to content
Spray Foam Supplier Missouri

Spray Foam Supplier Missouri: Straight From Springfield

ArmorFoam open-cell and closed-cell, made in Springfield. See how far your crew is from the plant and ask about pricing, pickup or a visit.

Spraying ArmorFoam closed-cell foam

Start a spray foam business

Spray foam for a living.

ArmorThane sets you up to do this work, and you own the business. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.

ArmorThane Mobile Coatings Unit trailer hitched to a pickup outside the plant Proportioner, A and B material drums and transfer pumps inside the spray rig Applicator in a protective suit holding a plural-component spray gun in a spray booth Proportioner control panel with heater, pressure balance and cycle counter controls

What comes with itProportioners, guns and complete spray rigs. We build them.

$0
franchise fees or royalties
35+
years in business
50+
countries with applicators
24/7
technical support
Springfield
Where ArmorThane makes its coatings and spray equipment
2660 N. Eastgate, Springfield, MO
1989
Year ArmorThane started manufacturing in Springfield
ArmorThane
≈5,000 bf
Closed-cell yield per set at perfect yield
ArmorFoam closed-cell
$0
Franchise fee or royalties in the applicator program
ArmorThane applicator program

If you spray foam in Missouri, the closest place to buy it may be the place it is made. ArmorThane makes its coatings and spray foam in Springfield and builds the rigs that spray them, so contractors from Joplin to St. Louis can deal with the plant itself instead of a warehouse two states away.

Quick answer

Looking for a spray foam supplier in Missouri? ArmorThane manufactures ArmorFoam open-cell and closed-cell spray foam at 2660 N. Eastgate in Springfield. Contractors in Missouri and the neighboring states can buy from the plant, get data sheets and technical help from the people who make the foam, and ask about pickup or a plant visit when they request pricing. Call (417) 831-5090 or use the form on this page.

ArmorThane plant and offices
2660 N. Eastgate, Springfield, MO 65803 · (417) 831-5090 · moreinfo@armorthane.com
Please call ahead before visiting so the right person is there to meet you.
Distance from the plant

How far is your crew from Springfield?

Pick the city closest to your shop to see a rough road distance and drive time to the plant. Then send a pricing request or ask about a plant visit. The ZIP or postal code helps our foam team work out freight if pickup doesn't make sense.

Estimate

Distance from the ArmorThane plant

Road miles are an estimate: the straight-line distance between city centers multiplied by 1.18 to allow for real roads. Drive time assumes an average of 55 mph with no stops. Check your map app before you plan a trip.

0
Road miles, one way (est.)
0
Drive time, one way (est.)
0
Round trip behind the wheel

Every city on the list

The same estimate for each city, closest first. Tap a column heading to sort.

CityStateRoad miles (est.)Drive time (est.)
Estimated from city-center coordinates: straight-line distance × 1.18, driven at 55 mph. Not a routing service.
Why it matters

What a Missouri plant gets a Missouri crew

Being a few hours from the source does not change the chemistry. It changes how fast you get answers and how easily you can see things for yourself. These are the practical upsides of buying spray foam where it is made.

People

Talk to the people who make it

When a pass starts shrinking or a set feels off, you are talking to the team that makes ArmorFoam and knows its data sheets, not a counter that has to forward your call.

Equipment

Rigs and parts from the same place

ArmorThane builds spray rigs and sells high-pressure equipment, so questions about your proportioner, hose or gun land in the same building as questions about the foam.

Training

Hands-on training

ArmorThane applicator packages include hands-on training and certification. Ask our team how and where it can be scheduled for your crew.

Visits

See it before you commit

Missouri contractors are close enough to ask for a plant visit. Call ahead and tell us what you want to see, whether that is equipment, product or the people you would be working with.

ArmorThane Mobile Coatings Unit spray rig
An ArmorThane Mobile Coatings Unit. The standard 20 ft rig sprays both foam and polyurea.

Pickup or freight?

For a crew in Branson or Joplin, a drive to Springfield may beat waiting on a truck. For Omaha or Memphis, freight probably makes more sense. Tell our foam team where you are and how much you need when you request pricing, and ask what pickup would look like for your order. We would rather plan it with you than have anyone make a wasted trip.

Pricing jobs for customers too? The spray foam insulation cost guide has 2026 installed prices per board foot.

The work

Missouri spray foam work, job by job

Missouri keeps foam crews busy with a wide mix of work: steel shops and barns out in the country, new homes around the metros, and older houses that need help in both humid summers and cold winters. Here is how the two ArmorFoam systems usually line up with that work. Every job still comes down to the building, the code and the data sheet.

JobFoam most crews useWhyWatch for
Metal buildings and shopsClosed-cellBonds to steel, adds rigidity and helps stop condensation on the panelsClean, dry, warm-enough panels per the data sheet
Pole barns and ag buildingsClosed-cellControls dripping under metal roofs and holds up to moistureAnimal or occupied areas may need a thermal or ignition barrier
Attic rooflines in homesOpen-cell, or closed-cell where depth is tightSeals the roof deck and pulls ducts inside the conditioned spaceIgnition barrier rules for attics in your local code
Walls in new constructionOpen-cell or closed-cellAir sealing plus insulation in one stepTrimming open-cell flush before drywall
Crawl spaces and rim joistsClosed-cellMoisture resistance and air sealing in damp spacesFix water problems before you insulate
Commercial flat roofsRoofing-grade foam plus coatingSeamless insulated roof over existing decksCoating window and recoat schedule
General practice, not a specification. Thermal and ignition barrier requirements come from your local building code; processing limits come from the product data sheet.
Summer

Humidity and hot roofs

Missouri summers are hot and muggy, and metal roofs sweat. That is a big reason closed-cell sells in shops and barns. Spray within the humidity and substrate limits on the data sheet, and keep moisture off the surface you are spraying.

Winter

Cold substrates

Winter work slows down when the steel or the sheathing is too cold for good adhesion and yield. The data sheet sets the minimum temperatures. Our foam team can help you work out settings for cold-weather jobs.

Commercial roof work is its own trade. See spray foam roofing and the SPF roofing cost guide if that is where your crew is headed, or commercial foam insulation for larger buildings.

Grow with us

Becoming a Missouri foam applicator

Some contractors call us for material. Others want to build a foam business from the ground up, or add foam to a roofing, concrete or bedliner shop. The ArmorThane applicator program is built for that second group, and there is no franchise fee and no royalty.

  • Hands-on training and certification on ArmorThane chemistry and equipment, included in applicator packages.
  • A 24/7 tech line for applicators, because foam problems do not keep business hours.
  • Rigs from ArmorThane. The standard 20 ft enclosed trailer runs a PMC PHX-40 proportioner, a 45 kW generator, a 23 CFM air compressor and 100 ft of heated hose. A 24 ft bumper-pull and a 26 ft gooseneck are built too.
  • More than foam. A well-specified rig sprays polyurea as well, so the same equipment can take on bedliners, roof coatings and protective coatings.
  • Third-party financing. Equipment financing is available through outside lenders; ArmorThane does not finance in-house.

How working with the plant goes

  1. Reach out

    Call (417) 831-5090 or use the form on this page. Tell us where you work and what you spray today.

  2. Talk through the work

    Job types, rough volume, the equipment you own and where you want the business to go. This is where we find out whether foam alone, or foam plus coatings, fits.

  3. Get it in writing

    Pricing, data sheets and safety data sheets for the products you will spray, plus an equipment quote if you need one.

  4. Plan pickup, freight or a visit

    Ask what makes sense for your location and order size, and whether a visit to the plant is worth the drive.

  5. Train, then spray

    Get your crew trained and through the OSHA respirator steps, then spray your first jobs with a tech line behind you.

See become an applicator, the spray rig lineup and the spray foam training guide.

Springfield, Missouri

Buy spray foam from the plant down the road.

ArmorFoam open-cell and closed-cell, made in Springfield, with data sheets, equipment and technical help from the people who make it.

Rather talk now? Call (417) 831-5090

FAQ

Missouri spray foam supplier questions

Is there a spray foam supplier in Springfield, Missouri?

Yes. ArmorThane manufactures ArmorFoam open-cell and closed-cell spray foam at 2660 N. Eastgate in Springfield, Missouri. Call (417) 831-5090 or use the pricing request on this page.

Can I pick up spray foam at the Springfield plant?

Ask our foam team when you request pricing. They can tell you whether pickup works for your order and set a time. Please call before driving over so the right people and the right material are ready for you.

How far is the plant from Kansas City and St. Louis?

By the estimate on this page, about 175 road miles from Kansas City and 230 from St. Louis, or a little over three and four hours of driving. Check a map app for your exact route.

What spray foam do Missouri pole barns and metal buildings usually get?

Most crews use closed-cell foam on metal buildings and pole barns because it bonds to steel and helps stop condensation under metal roofs. Check your local code for thermal or ignition barrier requirements, especially in occupied or animal areas.

Do you supply spray foam contractors outside Missouri?

Yes. ArmorThane works with contractors across the United States from Springfield. Contractors in Canada can call ArmorThane Coatings, Inc. at 780-444-6200.

Can my crew get trained on ArmorFoam?

ArmorThane applicator packages include hands-on training and certification. Ask our team how training can be scheduled for your crew, including whether it can happen at the plant.

About the distance estimatesMiles and drive times on this page are rough estimates from city-center coordinates, not routing. Processing settings, storage conditions and safety requirements come from each product's technical data sheet, SDS and OSHA rules.
AT
Written by the ArmorThane technical team. We have manufactured polyurea, polyurethane and polyaspartic coatings and plural-component spray equipment in Springfield, Missouri since 1989, and we make ArmorFoam open-cell and closed-cell spray foam.

Sources

  1. OSHA, 29 CFR 1910.134, Respiratory Protection. osha.gov/laws-regs/regulations/standardnumber/1910/1910.134
  2. ArmorThane, Spray foam rigs (standard 20 ft rig build specification). armorthane.com/spray-foam-rigs
  3. ArmorThane, Spray foam insulation cost guide (2026 installed prices). armorthane.com/spray-foam-insulation-cost

Made in Springfield, for Missouri foam crews.

ArmorThane makes ArmorFoam, builds spray rigs and trains applicators, with no franchise fee and no royalties. Talk to the plant before your next order.

United States 417-831-5090 · Canada 780-444-6200
Become an applicator

Start your coatings business with ArmorThane.

Tell us what you want to spray and where you are. An ArmorThane specialist will walk you through the equipment, chemicals, training and startup cost for the work you want to do.

  • Equipment package matched to your applications
  • Hands-on training and applicator certification
  • Technical support once you are spraying
Step 1 of 3

We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

Closer than you think. Talk to the plant.

Tell us where you work and what you spray. Our foam team in Springfield will send pricing and data sheets and can talk through pickup or a plant visit.

  • Your town and ZIP code
  • Open-cell, closed-cell or both
  • Typical jobs: shops, barns, homes
  • Rough sets per month
Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity