Spray-On Roof Coating: Rigs, Mils & Warranties
Which roof coatings can be sprayed, how many gallons each warranty tier takes, which pump, hose and tip to run, and when a roof shouldn’t be coated. With three calculators for contractors and owners.

Start a roof coating business
Spray roofs for a living.
ArmorThane sets you up to do this work, and you own the business. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.
- $0
- franchise fees or royalties
- 35+
- years in business
- 50+
- countries with applicators
- 24/7
- technical support
A spray on roof coating is the fastest way to put a seamless membrane on a commercial roof, and the fastest way to put one on the cars in the parking lot if the wind picks up. We manufacture sprayed roofing systems (polyurea roof liners like ArmorSeal 100 AL and ArmorFoam Roof 200 closed-cell spray foam), build spray rigs and train the crews who run them. This page covers the spray-applied side of roof coatings that most guides skip: which coatings can be sprayed, the mil math behind warranty tiers, the pump, hose and tip you need, and when a roof shouldn't be coated at all.
Acrylic, silicone and polyurethane roof coatings are sprayed with a heavy-duty airless rig; polyurea and spray foam need a heated plural-component proportioner. Coverage is all mil math: 1 gallon per 100 sq ft lays down about 16 wet mils, and dry mils = wet mils × volume solids. Silicone warranties typically step from 10 to 15 to 20 years at about 22, 29 and 36 dry mils (1.5, 2.0 and 2.5 gal per 100 sq ft). Installed costs run about $0.65–$1.75 per sq ft for acrylic, $1.50–$2.50 for silicone and $2–$5 for polyurethane (Angi, 2026), more for full commercial systems. Don't spray over wet insulation, ponding water or in wind, and asphalt shingle manufacturers' trade association advises against coating shingle roofs. Calculate your gallons.
Which roof coatings can be sprayed
Almost every liquid roof coating can be sprayed. The difference is the equipment and how much material actually becomes membrane. Click a column to sort.
| Coating | Standard | Volume solids | Spray equipment | Installed $/sq ft | Watch out for |
|---|---|---|---|---|---|
| Acrylic (waterborne) | ASTM D6083 | ≥50% (spec minimum) | Airless, single component | $0.65–$1.75 | Ponding water; can't apply near freezing or before rain |
| Silicone | ASTM D6694 (over SPF) | ≈90–96% | High-pressure airless (≈6,000+ psi) | $1.50–$2.50 | Hard to recoat with anything but silicone; slippery when wet |
| Polyurethane (aromatic base + aliphatic top) | ASTM D6947 (over SPF) | Product-specific | Airless or plural component | $2–$5 | Humidity during cure; aromatic bases need a UV top coat |
| Polyurea / hybrid | Manufacturer specs | 100% (e.g. ArmorSeal 100 AL) | Heated plural-component proportioner | Quote | Recoat windows; aromatic grades need a UV top coat |
| Spray foam + coating | ASTM C1029 Type III foam | Foam + topcoat | Plural-component foam rig | $5–$10 (system) | Wind, overspray and the coating's mils over foam |
Acrylics are the budget workhorse: waterborne, reflective, easy to clean up, and the D6083 spec requires at least 50% volume solids, so half of what you spray evaporates. Silicones are 90%+ solids, shrug off ponding better than acrylic and dominate restoration warranties, but almost nothing but more silicone sticks to them later. Polyurethanes are the toughest of the single-component group for foot traffic and hail. Polyurea is in a different class: 100% solids, gels in seconds, builds full thickness in a pass, and is what we spray on roofs that see abuse. Our ArmorSeal 100 AL is a 1:1, solvent-free polyurea roofing liner. For a non-spray overview, see our roof coating guide, silicone roof coating and spray foam roofing pages.

Gallons, mils & warranty calculator
Warranties are written in dry mils, but you buy and spray wet gallons. This converts between them the way manufacturers do: wet mils = dry mils ÷ volume solids, and gallons per 100 sq ft = wet mils ÷ 16.04. Check: Mule-Hide's 1.5 gal per 100 sq ft is 24 wet mils, which leaves about 22 dry at roughly 92% solids.
How much coating for the warranty you want
Warranty tiers are silicone examples (Mule-Hide, GAF Unisil). Always use your manufacturer's spec.
Sprayer, hose & tip selector
Roof coatings are thick, and hoses on a roof are long. The pump has to deliver enough pressure at the gun after a few hundred feet of hose, and enough flow to feed the tip. Pick the coating and your setup.
What equipment the job needs
Specs from Graco, Gaco and Pittsburgh Spray Equipment published guidance. Example rigs, not endorsements.
Reading a spray tip code
Graco-style airless tips use a three-digit code. Double the first digit for the fan width in inches at 12 inches from the surface; the last two digits are the orifice in thousandths of an inch. A 517 sprays a 10-inch fan through a .017 orifice, fine for paint and far too small for roof coatings. A 631 sprays a 12-inch fan through .031 and, per Gaco's guide, flows about 1.03 gallons per minute.
| Tip | Fan width @ 12 in | Orifice | Flow (silicone, Gaco) | Typical use |
|---|---|---|---|---|
| 627 | 12 in | .027 | ≈0.74 GPM | Detail work, thinner elastomerics |
| 629 | 12 in | .029 | ≈0.90 GPM | Silicone, acrylic field coats |
| 631 | 12 in | .031 | ≈1.03 GPM | Silicone field coats |
| 635 | 12 in | .035 | — | Heavy-bodied silicones, high build |
Can this roof be spray coated?
A coating restores a sound roof. It doesn't fix a failing one. Tick everything that's true today; any red item stops the job until it's fixed.
Is the roof (and the day) ready?
Conditions from the Mule-Hide silicone spec, NRCA, SPFA and ARMA.
Spray technique and overspray control
Clean, repair and prime
Power-wash, let it dry, repair seams, flashings and blisters, and prime where the manufacturer requires it. Coatings follow the substrate: a weak spot under the membrane becomes a weak spot in it.
Detail first
Brush or spray reinforced detail coats at seams, penetrations, drains and curbs before the field coat.
Hold distance and overlap
Gaco's guide: gun 12–18 inches from the surface, 50% overlap on each pass. Cross-hatch the second pass at 90° for even mils.
Measure as you go
Use a wet-mil gauge every few hundred square feet. Gallons on the roof ÷ area is the honest check at the end of the day.
Control the overspray
Mule-Hide doesn't recommend spraying "if any wind is occurring." SPFA notes that around 15 mph makes controlled spraying difficult and calls for a typical 25 ft setback from other workers; Gaco ropes off 150 ft. Cover intakes, shut down rooftop units and move the cars.
Spray coatings on asphalt shingles
"Spray on roof coating for asphalt shingles" is a popular search, and the honest answer is cautious. The Asphalt Roofing Manufacturers Association (ARMA) "strongly advises against" field-applied coatings and rejuvenators on installed shingles, citing curling or cupping, granule loss, trapped moisture and possible effects on fire, algae and impact ratings. Coating can also affect the shingle manufacturer's warranty.
Two different products get lumped together here:
- Shingle rejuvenators such as Roof Maxx are a sprayed soy-based penetrant, not a membrane. Roof Maxx claims up to 5 years per treatment and up to 3 treatments, at about $1.75 per sq ft.
- Shingle coatings such as Armor Garage's acrylic shingle coating ($379 per 5-gal pail covering about 1,250 sq ft in two coats, 5-year warranty) form a film over the shingles.
We don't recommend coating a pitched shingle roof that's near the end of its life. Re-roof it. If you're considering either product, read the shingle manufacturer's warranty first. Our shingle roof coating page covers this in more depth. Low-slope commercial roofs, metal roofs and spray foam roofs are where spray coatings earn their keep.
Spray roof coating cost
| System | Installed $/sq ft | Source |
|---|---|---|
| Acrylic coating | $0.65–$1.75 | Angi, Aug 2026 |
| Silicone coating | $1.50–$2.50 | Angi, Aug 2026 |
| Liquid rubber | $1.75–$3.50 | Angi, Aug 2026 |
| Polyurethane coating | $2–$5 | Angi, Aug 2026 |
| Commercial silicone restoration system | $3.50–$7.00 | West Roofing Systems |
| Spray foam + silicone | $5–$10 | West Roofing Systems |
Use the calculator above to price the material for your warranty tier; the difference between a 10-year and a 20-year silicone spec is about one extra gallon per 100 sq ft. On a 10,000 sq ft roof, that's roughly 100 gallons.
Spray roofs with polyurea and foam. We'll build your rig.
ArmorThane manufactures sprayed roofing systems (ArmorSeal polyurea liners and ArmorFoam Roof 200 closed-cell foam), builds mobile spray rigs and trains your crew on plural-component equipment. Not a franchise: no franchise fee, no royalties.
Building owners: get a roof coating quote →
Spray-on roof coating FAQ
Can you spray roof coating with an airless sprayer?
Yes. Acrylic, silicone and single-component urethane roof coatings are sprayed with heavy-duty airless rigs. Silicone needs high pressure; Gaco calls for at least 5,950 psi output. Polyurea and spray foam need a heated plural-component proportioner instead.
What size spray tip do I need for roof coating?
Typically .025–.035 inch orifices for elastomeric coatings (Graco) and .029–.035 for silicone (Gaco), such as a 629 or 631 tip. Check the coating manufacturer's spray guide.
How many gallons of roof coating per 100 square feet?
It depends on the target dry mils and the coating's volume solids. One gallon per 100 sq ft is about 16 wet mils. Silicone specs commonly call for 1.5, 2.0 and 2.5 gallons per 100 sq ft for 10, 15 and 20-year warranties; granulated surfaces need more.
How thick should a roof coating be for a 10, 15 or 20-year warranty?
In Mule-Hide's silicone specification, about 22, 29 and 36 dry mils respectively. Other manufacturers and chemistries differ, so use the specific warranty spec.
Is spray-on roof coating good for asphalt shingles?
Generally no. The Asphalt Roofing Manufacturers Association strongly advises against field-applied coatings and rejuvenators on installed shingles because of curling, granule loss, trapped moisture and possible effects on fire and impact ratings. Spray coatings are best suited to low-slope commercial, metal and spray foam roofs.
What's the difference between Roof Maxx and a roof coating?
Roof Maxx is a sprayed soy-based rejuvenator that soaks into asphalt shingles; it doesn't form a membrane. A roof coating forms a continuous waterproof film over the roof.
How much does spray-on roof coating cost?
In 2026, about $0.65–$1.75 per sq ft for acrylic, $1.50–$2.50 for silicone and $2–$5 for polyurethane installed (Angi). Full commercial silicone restoration systems run about $3.50–$7.00, and spray foam plus silicone $5–$10 per sq ft.
Can you spray roof coating in the wind?
It's not recommended. Overspray travels, and at around 15 mph controlled spraying becomes difficult. Some manufacturers advise against spraying in any wind. Protect cars, intakes and people downwind.
Can you coat a roof with ponding water or wet insulation?
No. Wet insulation must be removed and replaced, and ponding (water remaining 48 hours after rain) should be corrected with drainage or tapered insulation first. Coatings restore sound roofs; they don't fix failing ones.
Which spray roof coating lasts longest?
Life depends mostly on thickness and the warranty spec rather than chemistry alone. Silicone and polyurethane systems are commonly warranted 10–20 years at higher mils; spray foam systems with a maintained topcoat can last longer with periodic recoating.
Sources
- IIBEC, ASTM D6083 explained: iibec.org
- MaTest Labs, ASTM D6694 summary: matestlabs.com
- ASTM D6947 (moisture-cured polyurethane coatings over SPF): store.astm.org
- GEI, wet film formulae: geionline.com
- Mule-Hide 100% silicone roof coating guide specification: buildsite.com (PDF)
- GAF, installing silicone commercial roof coatings: gaf.com
- GacoFlex S20 silicone product data sheet: gaco.com (PDF)
- Gaco silicone coating spray guide: gaco.com (PDF)
- Graco GMAX II 7900 Roof Rig: graco.com
- Graco roofing equipment catalog: graco.com (PDF)
- Graco, choosing and understanding airless spray tips: graco.com
- Pittsburgh Spray Equipment, spraying elastomerics and roof coatings: pittsburghsprayequip.com
- Graco Reactor 2 E-XP2: graco.com
- SPFA, site preparation: spraypolyurethane.org
- Professional Roofing, SPF standards: professionalroofing.net
- Professional Roofing, ponding water: professionalroofing.net
- Angi, roof coating cost per square foot (Aug 2026): angi.com
- West Roofing Systems, spray-on roofing systems: westroofingsystems.com
- ARMA, coating of asphalt shingles after installation: asphaltroofing.org
- Roof Maxx, soybean oil vs roof coatings: roofmaxx.com
- Armor Garage, shingle roof coating: armorgarage.com
Spray it once. Spray it right.
ArmorThane manufactures sprayed polyurea and spray foam roofing systems, builds the rigs that apply them and trains the crews who run them. Building owners get a certified applicator; contractors get a business with no franchise fee.
Protective Roof Coatings & Leak Repair
Flip through the whole brochure right here, or open it full screen on Issuu to share it.
Need a roof sprayed? Get a quote from a certified applicator.
Tell us the roof type, size and condition. We'll connect you with an ArmorThane-certified applicator for a spray polyurea, spray foam or coating quote with the mils and warranty in writing.
- Commercial, metal and spray foam roofs
- Polyurea roof liners and SPF roofing
- Mils, primer and warranty on the quote
- Contractors: ask about spray rigs and training
More to read on roofing
Short reads from ArmorThane on Issuu. Tap one to open it right here.















