Skip to content
Spray Foam Insulation Near Me

Spray Foam Insulation Near Me: Real Costs & Crews

Get matched with a trained spray foam crew near you, estimate board feet and installed cost, and know what to ask before anyone sprays your building.

Applicator installing ArmorFoam closed-cell insulation

Start a spray foam business

Spray foam for a living.

ArmorThane sets you up to do this work, and you own the business. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.

ArmorThane Mobile Coatings Unit trailer hitched to a pickup outside the plant Proportioner, A and B material drums and transfer pumps inside the spray rig Applicator in a protective suit holding a plural-component spray gun in a spray booth Proportioner control panel with heater, pressure balance and cycle counter controls

What comes with itProportioners, guns and complete spray rigs. We build them.

$0
franchise fees or royalties
35+
years in business
50+
countries with applicators
24/7
technical support
$0.44–$0.73
Open-cell, per board foot installed
2026 median band, ArmorThane cost guide
$1.00–$2.12
Closed-cell, per board foot installed
2026 median band, ArmorThane cost guide
$1,000+
Typical minimum job charge
Often $1,000–$2,000
100,000 bf
Sprayed before SPFA Installer certification
SPFA Professional Certification Program

Spray foam is one of the few home improvements where the product is made on site. Two liquids meet at the spray gun, react and expand into insulation on your walls and roof deck. When the crew, the equipment and the conditions are right, you get a building that is air sealed and insulated in one step. When they aren't, you get an odor, a callback or foam pulling away from the framing. Finding spray foam insulation near you is easy. Finding the right crew takes a few good questions.

Quick answer

Local spray foam contractors typically charge $0.44 to $0.73 per board foot for open-cell and $1.00 to $2.12 per board foot for closed-cell, installed, in 2026. That's roughly $1.54 to $2.56 per square foot for 3.5 inches of open-cell and $2.00 to $4.24 for 2 inches of closed-cell, and $1,000 to $2,000 minimums are common. Ask every crew for a quote in board feet and inches, the brand of foam and the re-entry time before you sign.

Local crews

Spray foam contractors near you, matched by ZIP

Crews that spray ArmorThane foam are independent local contractors running plural-component rigs built for the work. Tell us what you're insulating and where, and we'll pass the request to the nearest one. If you're already comparing several bids, our guide to vetting spray foam contractors goes deeper on what to check.

Crew match

Request a spray foam quote

Enter your ZIP or postal code and a few details. We route the request to the nearest certified ArmorThane applicator; nothing is shared with anyone else.

Enter your ZIP or postal code. We'll fill in the request form below, so you only add your contact details.

Rather call? Reach us in Springfield, Missouri at (417) 831-5090, or ArmorThane Coatings, Inc. in Canada at 780-444-6200.

Foam types

Open-cell or closed-cell: what a good crew will suggest

Every spray foam quote starts with this choice. Open-cell is soft, light and cheaper per inch. Closed-cell is dense, rigid and does more work per inch. A good crew picks by location and moisture, not by whichever drums happen to be on the trailer.

PropertyOpen-cellClosed-cell
FeelSoft and spongyRigid and hard
Nominal densityAbout 0.5 lb per cubic footAbout 2 lb per cubic foot
R-value per inchAbout R-3.5About R-6 to R-7
Water and vaporLets vapor through; keep it out of wet spotsResists water; slows vapor at enough thickness
Installed price$0.44–$0.73 per board foot$1.00–$2.12 per board foot
Where crews use itInterior walls, roof decks where code allows, sound controlRim joists, crawl spaces, basements, metal buildings
R-values are typical published figures; your product's data sheet and local code govern. Prices from the ArmorThane spray foam cost guide, 2026.
ArmorFoam

Open-cell spray foam

Light, fast-expanding foam for affordable air sealing and sound control inside the building envelope. It fills odd cavities and trims flush with the studs. See ArmorFoam open-cell.

ArmorFoam

Closed-cell spray foam

Dense foam that resists moisture and adds rigidity, with a yield of about 5,000 board feet per set at perfect yield. It's the usual pick for rim joists, crawl spaces and steel buildings. See ArmorFoam closed-cell.

Estimate

How many board feet, and what it should cost

Spray foam is priced by the board foot: one square foot, one inch thick. Measure the area you want covered, choose the foam and the thickness, and the calculator shows the board feet a contractor will price, plus the installed range from our 2026 cost guide. For the full breakdown by project, see the spray foam insulation cost guide.

Board-foot calculator

Spray foam board feet and installed cost

Board feet = area (sq ft) × thickness (inches). Installed cost = board feet × the 2026 median price band: open-cell $0.44–$0.73 and closed-cell $1.00–$2.12 per board foot. Many contractors charge a $1,000–$2,000 minimum. Framing depth, waste, trimming and any thermal or ignition barrier are not included.

Foam type
Wall length × height, or roof deck area.
Common: 3.5 in open-cell, 2 in closed-cell.
0
Board feet
0
Low installed
0
High installed
0
Per sq ft at this thickness

Where it goes

Where spray foam earns its keep, and where to be careful

Foam is at its best where air leaks and awkward framing defeat batts. It is at its worst where someone sprays it without thinking about moisture, ventilation and what the building needs to dry.

Strong fit

Rim joists

Closed-cell seals the leaky band where the house sits on the foundation, a spot batts never fill well.

Strong fit

Metal buildings and pole barns

Closed-cell on the inside of steel panels cuts the condensation that drips off roofs and walls. See commercial foam insulation.

Strong fit

Crawl spaces and basement walls

Closed-cell on foundation walls resists moisture and adds R-value without eating much room.

Depends

Attic roof decks

Foam on the underside of the roof deck creates an unvented attic. It works well when it's designed to code. Ask how the crew handles vapor control and any gas appliances up there.

Depends

Existing finished walls

Spray foam needs open cavities. Closed walls are usually insulated with injection or pour foams instead, so spray foam fits new construction and gut remodels.

Be careful

Wet or damaged framing

Foam won't fix a leak. Roof leaks, plumbing leaks and wet wood need to be fixed and dried first, or the foam simply hides the problem.

Vetting

Six questions for any spray foam crew

Price matters, but the answers to these questions tell you more about how the job will go than the bottom line does.

  1. Will you quote it in board feet and inches?

    A square-foot price without a thickness can't be compared to anything. Ask for board feet by area and the target thickness for each one.

  2. Which foam, and can I see the data sheet?

    The data sheet lists density, R-value, maximum pass thickness and re-occupancy time. A crew spraying ArmorFoam can show you ours.

  3. How is the crew trained?

    Look for chemical health and safety training such as the free CPI course, an OSHA medical evaluation and respirator fit test, and SPFA certification. SPFA's Installer level requires 100,000 board feet of experience; Master Installer requires 500,000 plus a field exam.

  4. When can we come back inside?

    Occupants and pets should stay out while foam is sprayed and for the re-entry time the manufacturer sets, with the area ventilated. Get that time in writing.

  5. Does the job need a thermal or ignition barrier?

    Building codes generally require foam in living spaces to be covered by a thermal barrier such as drywall, and foam in attics and crawl spaces may need an ignition barrier. Ask who provides it and whether it's in the price.

  6. What if something smells or doesn't stick?

    Foam sprayed off-ratio, or with the wrong substrate or chemical temperatures, can smell, shrink or pull away. Ask how they check their mix and what they do if a section fails.

Red flagsNo board-foot figure on the quote. No mention of ventilation or re-entry time. A crew that says you can stay home while they spray. A contractor who can't tell you what foam they use.
Spray day

What spray day looks like

A tidy, well-run job follows the same pattern whether it's a rim joist or a 10,000 square foot shop.

  • Masking. Windows, floors, wiring boxes and anything not getting foam is covered before the rig starts.
  • Ventilation and access. The work area is ventilated, and occupants and pets are out of the building section being sprayed.
  • Spraying in passes. Foam goes on in passes no thicker than the data sheet allows, so it cures properly instead of overheating.
  • Trimming and cleanup. Open-cell is often shaved flush with the studs so drywall sits flat. Overspray and trimmings are bagged and removed.
  • Walkthrough and re-entry. The crew walks the job with you, points out any areas left for a thermal barrier and confirms when it's safe to come back in.
Spray foam quotes

Trained crews. Quotes in board feet.

Tell us what you're insulating and where. We'll route it to the nearest crew spraying ArmorThane foam, and they'll measure before they price.

Contractors: become an ArmorThane applicator

FAQ

Spray foam insulation questions

How much does spray foam insulation cost near me?

In 2026, installed spray foam typically runs $0.44 to $0.73 per board foot for open-cell and $1.00 to $2.12 per board foot for closed-cell. That's about $1.54 to $2.56 per square foot for 3.5 inches of open-cell and $2.00 to $4.24 per square foot for 2 inches of closed-cell. Small jobs often hit a $1,000 to $2,000 minimum.

Is closed-cell or open-cell spray foam better?

Neither is better everywhere. Closed-cell resists moisture and delivers more R-value per inch, so it suits rim joists, crawl spaces, basements and metal buildings. Open-cell costs less per inch, fills cavities well and dampens sound, so it suits many interior walls and roof decks where code allows.

How long do I need to stay out after spray foam is installed?

Stay out while the foam is sprayed and for the re-entry time the manufacturer sets for that product, with the area ventilated. Your contractor should give you that time in writing before the job starts.

Can spray foam go into existing walls?

Spray foam needs open cavities, so it is used in new construction, gut remodels, attics, crawl spaces and rim joists. Closed walls are usually insulated with injection or pour-in foams instead.

What training should a spray foam contractor have?

At minimum, the crew should have chemical health and safety training such as the free CPI course, an OSHA medical evaluation and a respirator fit test. SPFA certification shows experience: Installer at 100,000 board feet and Master Installer at 500,000 board feet plus a field exam.

How do I find a spray foam contractor near me that uses ArmorThane foam?

Use the ZIP request tool on this page or call (417) 831-5090. We route your request to the nearest crew spraying ArmorThane foam. In Canada, call ArmorThane Coatings, Inc. at 780-444-6200.

Code and safetySpray foam chemicals are applied by trained crews wearing supplied-air respirators and full protective gear. This page is general information. Follow the manufacturer's instructions and your local building code, and ask your building department if you're unsure what a project requires.
AT
Written by the ArmorThane technical team. We manufacture ArmorFoam open-cell and closed-cell spray foam, and the plural-component rigs that spray it, in Springfield, Missouri since 1989. Prices here come from our 2026 cost guide; your contractor's written quote governs.

Sources

  1. ArmorThane, Spray foam insulation cost guide (2026). armorthane.com/spray-foam-insulation-cost/
  2. ArmorThane, Spray foam insulation training: CPI course, OSHA fit testing and SPFA certification levels. armorthane.com/spray-foam-insulation-training/
  3. U.S. Department of Energy, Energy Saver: Insulation materials. energy.gov/energysaver/insulation-materials
  4. OSHA, 29 CFR 1910.134, Respiratory protection. osha.gov/laws-regs/regulations/standardnumber/1910/1910.134
  5. Center for the Polyurethanes Industry, spray polyurethane foam health and safety. spraypolyurethane.org

Foam sprayed by crews who know the chemistry.

ArmorThane makes ArmorFoam open-cell and closed-cell spray foam and the rigs that spray it. Tell us where your project is and we'll connect you with a trained local crew.

United States 417-831-5090 · Canada 780-444-6200
Become an applicator

Get the foam you need, quoted in board feet.

Tell us what you want insulated and where. We'll route it to the nearest crew spraying ArmorThane foam, and they'll measure before they quote.

  • What you're insulating: attic, walls, barn
  • Rough square footage
  • Open-cell, closed-cell or not sure
  • Your city and ZIP or postal code
Step 1 of 3
Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity