Skip to content
Spray on Bedliner: Ultimate Truck Bed Protection

Why spray-in & spray-on bedliners are the ultimate truck bed protection

Spray in bedliner from ArmorThane: a permanent spray-on polyurea truck bed liner. Compare textures and colors, then find a certified installer near you.

Truck with spray-on bedliner for enhanced durability and protection

For applicators

Spray bedliners for a living.

A truck rolls in bare and usually leaves lined the same day. ArmorThane sets you up to do that work. We make the chemistry, build the rigs, train you hands-on and answer the phone when a job gets difficult. You pay no franchise fee and no royalties. It has been that way since 1989.

One bedliner, start to finishTape and plastic go on first. Clean edges are what the customer sees.

The benefits of ArmorThane spray on bedliner

Choosing an ArmorThane spray-on bedliner means investing in long-lasting quality, and a technology that outperforms the competition (Enhanced resale value is another bonus: a protected bed helps preserve your truck’s value). There’s a lot to love about bedliner products, but we’ve boiled down the top three benefits for almost any truck bed:

Textured protective coating on car rear

Superior durability & long-lasting protection

ArmorThane bedliners create a thick, impact-resistant layer that guards against dents, scratches, and abrasions. Their tough and durable finish is engineered to withstand heavy loads and rough cargo that preserves your truck bed’s integrity for the long-term (and the long-haul; literally). Our coatings won’t crack or peel, so can rest assured that your truck bed is supported by long-lasting protection mile after mile.

SUPERIOR DURABILITY & LONG-LASTING PROTECTION
Cover of the ArmorThane brochure: Heavy-Duty Coatings for Vehicles & Equipment
Brochure

Heavy-Duty Coatings for Vehicles & Equipment

Flip through the whole brochure right here, or open it full screen on Issuu to share it.

Permanent & airtight bond

Unlike drop-in bed liners that can trap moisture and shift under heavy loads, ArmorThane’s spray-on bedliner bonds permanently to the surface of your truck bed. Our polyurea and polyurethane coatings create an airtight, seamless seal that conforms to every contour, bolt hole, and crevice – eliminating gaps where water, dirt, and corrosion can take hold. This permanent bond means no rattling, no sliding, and no hidden rust forming underneath. Once applied, the coating becomes part of your truck bed itself, providing a unified layer of protection that lasts the lifetime of your vehicle.

PERMANENT & AIRTIGHT BOND 

All-weather & all-chemical resistance

ArmorThane formulations are built to endure extreme temperatures – from blistering desert heat to bitter winter cold – without becoming brittle or losing adhesion. They also feature built-in UV resistance, so the color won’t fade or chalk even under intense sun exposure. Plus, the coating resists damage from gasoline, oil, fertilizer, and other chemicals, so spills and harsh substances won’t compromise the protection. This makes our bedliners ideal for demanding use in industrial applications and even on emergency vehicles.

ALL-WEATHER & ALL-CHEMICAL RESISTANCE

Endless bedliner applications

Spray-on bedliners aren’t just for pickup truck beds – far from it. ArmorThane’s versatile coatings offer truly endless applications across automotive, industrial, and even outdoor projects, but we’ll share just a few to whet your appetite:

Pickup truck beds & tailgates

Everyday pickup owners and professionals rely on ArmorThane to protect their truck beds, tailgates, and wheel wells. Tossed tools, shifting cargo, and harsh weather are no match for our liner. It even coats in-bed tool boxes, so your gear stays secure and your truck is ready for any job or outdoor adventures.

Off-road & recreational vehicles

Off-road enthusiasts apply ArmorThane coatings to their Jeeps, ATV/UTV beds, roll cages, and bumpers for extra durability on rough trails. Mud, sand, and rocky terrain are no challenge – our coating prevents scratches and dents, and it makes cleanup easy after each adventure.

Trailers & boats

From utility trailers to boat decks, ArmorThane provides a tough, waterproof layer that stands up to abuse. Spraying a trailer floor prevents abrasion and rust from heavy loads, while coating a boat deck or ramp adds a non-slip, weatherproof surface. Even RVs benefit – our coatings seal roofs and compartments against leaks and damage.

Fleet & Emergency Vehicles

Commercial and emergency vehicles alike turn to ArmorThane for heavy-duty protection. Lining a work van’s cargo area or a fire truck’s equipment bay prevents wear, corrosion, and rust from constant use. Even heavy machinery in industrial applications – from construction to farming – can have high-wear parts coated to extend their service life under tough conditions.

Custom colors and a durable finish

We understand that one size doesn’t fit all. That’s why we offer bedliners in an expansive range of colors, not just basic black or simple primary colors. Want your liner to match your truck’s paint or your company’s branding; we can mix custom colors to suit your needs, and our pigments are UV-stable to provide excellent UV resistance so colors won’t fade even under harsh sun.

You can also choose the texture of your bedliner. Prefer a sleek, easy-to-clean surface, or a rough, non-slip grip to keep cargo from sliding? We can do either. No matter what custom combination you choose, the result is a tough, uniform coating that delivers the same protection and durability ArmorThane is known for.

Professional Spray-On Bedliner Application

Applying ArmorThane’s spray-on bedliners

Surface preparation

The key to any lasting coating is a properly prepared surface. Applicators meticulously clean, sand, and degrease the truck bed (or other substrate) to remove dirt, rust, and old finishes. Thorough surface preparation creates the ideal profile for the coating to bond, ensuring maximum adhesion with no weak spots.

Professional applications

Once prepped, the coating is applied using specialized equipment. We utilize a high-pressure plural-component pump system that heats and sprays the polyurea material through a precision spray gun. An industrial air compressor and heater help deliver a consistent spray, and unlike a basic aerosol spray can from a DIY kit, our high-pressure system lays down a far thicker truck bed coating spray that coats every corner of the surface. The sprayed-on coating cures within seconds to form an airtight, seamless layer – a true permanent solution that won’t peel or chip.

Fast curing & final finish

ArmorThane’s advanced chemistry means your new bedliner sets very quickly. In just a few minutes it becomes tack-free, and within a few hours it fully hardens into a rugged shell. After application, the finish is inspected to ensure uniform coverage and proper thickness, and the entire application process is typically completed on the same day. You’ll drive away with a bedliner that’s ready for hard use and built to last.

Note: While DIY options do exist, a home spray on bedliner kit or truck bedliner kit cannot match the bonding strength and long-lasting protection of ArmorThane’s professionally applied system. Our years of expertise and proper equipment make all the difference in achieving a bedliner that will truly stand the test of time.

APPLYING ARMORTHANE’S SPRAY-ON BEDLINERS

Protect your truck bed with ArmorThane

ArmorThane has perfected our coating technology to deliver top-tier results. We formulate our own polyurea and polyurethane blends, and guarantee that our bedliner’s physical properties meet the highest standards for superior protection. We’re a one-stop shop for protective coatings, providing everything our applicators need to succeed – from high-performance coating materials to specialized spray equipment and thorough training. Our commitment to excellent customer service and technical support means help is always available if you have questions or need assistance. Whether you’re a truck owner seeking the best bedliner or a business looking to offer versatile custom spray solutions, ArmorThane has you covered. We even offer an ArmorThane Applicator Program for entrepreneurs who want to join our network and benefit from our proven, durable products and support.

More than just a bedliner​​​​

Spray On Truck Bedliner with ArmorThane

Spray On Truck Bedliner

Our bedliner will give your truck the ultimate spray on bedliner protection. We offer a spray in bedliner that protects your truck bed’s paint from scratches and scrapes. Learn more
Vehicle grille with protective coating

Jeeps & Off-Road Vehicles

For Jeeps: No Other Sprayed In Coating Looks Better or Lasts Longer than ArmorThane. Providing Jeep bedliners since 1989. Check out all of our options. Learn more
Dump truck with protective coating

Commercial Trucks

Tough Coatings Repair and Protect Surfaces on Commercial and Industrial Trucks and Equipment. Lengthen Service Life with No Scratches, Dents, Rust Damage. Learn more
Trailer bed with protective coating

Trailers

Durable coatings for trailer beds and exteriors repair and protect against scratches, dents, rust just like with truck bed liners. Check out our before and after pictures. Learn more
Boat Deck with Protective Coating

Boats, Marine & Docks

Protect and repair boat decks, hulls and marinas with tough, waterproof Polyurethane sprayed on coatings. 1We offer boat hull protection and boat liners. Learn more
Military vehicle protective coatings

Military Vehicles

Polyurea coatings specifically designed for blast protection. Significantly reduce casualties, property damage in military, government, high profile risks. Learn more
Emergency Vehicles

Emergency Vehicles

First responders do not have time to fret over whether their fire engines, police cars, ambulances, and SWAT vehicles are unpredictable and unreliable due to corrosion, abrasion, Learn more
Luxury van interior with black leather seats

Sprinter Vans

Protect your Sprinter van build with ArmorThane's durable spray-on coatings. Ideal for camper van conversions, delivery fleets, and mobile workshops – our bedliner coating shields floors, wheel wells, and cargo areas from daily wear and tear.Learn more
RV Roof Coatings

RV Roof Coatings

ArmorThane, the industry leader, has the solution to your RV roofing problems. The 100% spray-on polyurea protective coating forms a barrier against water seepage and deterioration. Learn more

Be your own boss: Start a bedliner business

The explosive rise in popularity of trucks and bedliner paint jobs have produced exciting new opportunities to join the coatings industry. More people than ever are looking to leverage polyurea spray elastomer technology for both personal and commercial vehicles, and spray-on bedliner coatings are only one of countless applications of this technology. That’s why ArmorThane offers our ArmorThane applicator program, which teaches everything you need to know about polyurea technology. We help you gain foundational knowledge while connecting you with our global support network and providing industry-leading tools and equipment. So if you’re interested in learning more about spray-on bedlining or polyurea technology in general, enroll in our applicator program or contact us for more information. See you soon!

Video: Spray on Bedliner: Ultimate Truck Bed Protection
Become an applicator

Start your coatings business with ArmorThane.

Tell us what you want to spray and where you are. An ArmorThane specialist will walk you through the equipment, chemicals, training and startup cost for the work you want to do.

  • Equipment package matched to your applications
  • Hands-on training and applicator certification
  • Technical support once you are spraying
Step 1 of 3

To help us prepare for a discussion with you, please provide some information on the type of Protective Coating business you are considering, including where your business would be located.

Tyler Gleckler - ArmorThane blast mitigation specialist author photo
About the author

Tyler Gleckler

I am a chemist with a specialization in nanotechnology and applied materials chemistry. My work has focused on the characterization of optoelectronic materials, namely including semiconductor nanocrystals.

Become an applicator

Start your coatings business

Choose “becoming an Applicator / Dealer” and add your details. Our team will call you to talk through markets, equipment and budget.

1Choice
2Contact Information
3Location

Rather talk now? (417) 831-5090 · About the opportunity